-
Angled Ball Joint
Angled Ball Joint
- Ball Stud Din 71803
- Ball sockets DIN 71805
- Tensile Strength class 5
- Material : Mild steel, En1AL
- Surface treatment: zinc plated with clear/yellow/olive green/trivalent passivation
-
Couplers
Hydraulic Couplers
- Hydraulic coupler is used to lubricate standard grease fittings.
- Hardened coupler body withstands high pressure without deformation.
- Fully hardened spring steel jaws.
- Hexagonal nut for easy tightening.
- Recommended for use with hand operated grease guns.
- With built-in ball check which prevents leak and lubricant backup if the grease gun your using does not feature a …
-
Couplers
Button Head Coupler
- For greasing of button head grease fittings
- Zinc Die cast body
- Sizes: As per Chart below
- Mostly used on heavy machinery & contractors equipment
- Types: Push-On & Hook-On
- For hand operated grease gun only
-
Grease Nipples , All Categories
Metric Thread Grease Nipples
- Standard: DIN 71412
- Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
- Thread: Parallel , Taper
- Sizes: As per below chart or as per customer requirement
- Heat Treated Springs For increased Life
- Surface treatment: zinc plated with clear/yellow/olive green/trivalent passivation
ISO Metric thread is a globally standardized thread and metric thread grease fittings are most widely used fittings in the …
-
Grease Nipples
Two Face Grease Nipples
- Standard: DIN 71412, SAE J-534
- Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
- Thread: Parallel, Taper
- Sizes: As per below chart or as per customer requirement
- Heat Treated Springs For increased Life
- Surface treatment: zinc plated with clear/yellow/olive green/trivalent passivation.
-
Grease Nipples
Hexagonal Grease Nipples
- Standard: DIN 71412, ISO
- Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
- Sizes: As per below chart or as per customer requirement
- Thread: Parallel, Taper
- Heat Treated Springs For increased Life
- Surface treatment: zinc plated with clear/yellow/olive green/trivalent passivation
-
Grease Nipples
BSP Thread Grease Nipple
- Standard: DIN 71412
- Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
- Sizes: As per below chart or as per customer requirement
- Heat Treated Springs For increased Life
- Surface treatment: zinc plated with clear/yellow/olive green/trivalent passivation
BSP thread grease nipples are manufactured in parallel (G) and taper (R) thread.
-
Grease Nipples
Lock Nut Grease Nipples
- Standard: DIN 71412, ISO
- Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
- Thread: Parallel , Taper
- Sizes: As per below chart or as per customer requirement
- Heat Treated Springs For increased Life
- Surface treatment: zinc plated with clear/yellow/olive green/trivalent passivation
-
Grease Nipples
Grease Nipples Set
- Most popular grease nipples in a convenient compartmentalized refillable carry kit.
- Standard: DIN 71412, SAE 534, IS
- Sizes: As per below chart or as per customer requirement.
- Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
- Thread: Parallel , Taper
- Heat Treated Springs For increased Life
- Surface treatment: zinc plated with clear/yellow/olive green/trivalent passivation
-
Drive Type Grease Nipples
Drive Type Grease Nipples
- DIN 71412 Standard
- Drive-in-type with plain shank
- Angle: Straight (180°), 45° and 90°
- Sizes: As per below chart or as per custmer requirement
- Material: Mild Steel, En1AL, 11SmnPB30+C and SAE 12L13
-
Grease Nipples
NPT/PTF Thread Grease Nipples
- Standard: DIN 71412, SAE J534
- Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
- Thread: Taper
- Sizes: As per below chart or as per customer requirement
- Heat Treated Springs For increased Life
- Surface treatment: zinc plated with clear/yellow/olive green passivation, trivalent zinc plated.
NPT is an American standard thread and its taper rate is 1/16 inch.
-
Grease Nipples
Square Head Grease Nipples
- Standard: DIN 71412, ISO
- Material: Mild Steel, En1AL, SAE 12L13
- Sizes: As per below table or as per customer requirements
- Thread: Parallel
- Heat Treated Springs For increased Life
- Surface treatment: zinc plated with clear/yellow/olive green/trivalent passivation
-
Grease Nipples
Engine Grease Nipples
- Standard: DIN 71412, ISO
- Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
- Thread: Parallel
- Sizes: As per below table or as per customer requirements
- Heat Treated Springs For increased Life
- Surface treatment: zinc plated with clear/yellow/olive green/trivalent passivation
-
Grease Guns
Economy Lever Action Grease Gun
Most popular value priced Economy Lever Action Grease Gun – for general purpose lubrication across all sorts of applications like Industrial, Agricultural and Automotive applications.
Features:
- Lever Action Grease Gun have a sturdy construction designed for use in daily maintenance work.
- 2-way loader for cartridge and suction loading.
- standard air release valve.
- Powder coated for durability with non-slip grip.
- Option for …
-
Grease Guns
Heavy Duty Lever Action Grease Gun
Features:
- Heavy Duty Lever Action Grease Gun includes a heavy duty powder coated barrel.
- Cast aluminum head with bulk loader / bleeder valve, soft rubber grip with heavy duty follwer spring.
- Variable stroke lever for use in confined areas.
- 3-way loader allows cartridge, suction, & bulk loading.
- Option for 6″ rigid extension Or 6″ flexible Hose.
- Rubber Grip for conveience.
…
Shop
Showing 1–16 of 27 results