Lock Nut Grease Nipples

  • Standard: DIN 71412, ISO
  • Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
  • Thread: Parallel , Taper
  • Sizes: As per below chart or as per customer requirement
  • Heat Treated Springs For increased Life
  • Surface treatment: zinc plated with clear/yellow/olive green/trivalent passivation

Enquiry about Lock Nut Grease Nipples

Description

1. A grease fitting/grease nipple/zerk fitting is used in mechanical systems to feed lubrication grease under moderate to high pressure between frictional surfaces.
2. Ball check in the head prevents dirt and grit from getting into the fitting.
3. Heavier wall thickness for extra strength.
4. Fitting profile and dimensions comply with SAE, DIN, BS, JIS, & IS standards.

 

Reviews

There are no reviews yet.

Be the first to review “Lock Nut Grease Nipples”

Your email address will not be published. Required fields are marked *

Related products

  • Grease Nipples

    Square Head Grease Nipples

    • Standard: DIN 71412, ISO
    • Material: Mild Steel, En1AL, SAE 12L13
    • Sizes: As per below table or as per customer requirements
    • Thread: Parallel
    • Heat Treated Springs For increased Life
    • Surface treatment: zinc plated with clear/yellow/olive green/trivalent passivation
  • Grease Nipples

    BSP Thread Grease Nipple

    • Standard: DIN 71412
    • Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
    • Sizes: As per below chart or as per customer requirement
    • Heat Treated Springs For increased Life
    • Surface treatment: zinc plated with clear/yellow/olive green/trivalent passivation

    BSP thread grease nipples are manufactured in parallel (G) and taper (R) thread.

  • Grease Nipples

    UNF/SAE J-534 Grease Nipples

    • Standard: SAE-J 534, DIN 71412
    • Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
    • Sizes: As per below chart or as per customer requirement
    • Thread: Parallel,  Taper
    • Heat Treated Springs For increased Life
    • Surface treatment: zinc plated with clear/yellow/olive green passivation, trivalent zinc plated
  • Grease Nipples

    NPT/PTF Thread Grease Nipples

    • Standard: DIN 71412, SAE J534
    • Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
    • Thread: Taper
    • Sizes: As per below chart or as per customer requirement
    • Heat Treated Springs For increased Life
    • Surface treatment: zinc plated with clear/yellow/olive green passivation, trivalent zinc plated.

    NPT is an American standard thread and its taper rate is 1/16 inch.