Grease Nipples Set

  • Most popular grease nipples in a convenient compartmentalized refillable carry kit.
  • Standard: DIN 71412, SAE 534, IS
  • Sizes: As per below chart or as per customer requirement.
  • Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
  • Thread: Parallel , Taper
  • Heat Treated Springs For increased Life
  • Surface treatment: zinc plated with clear/yellow/olive green/trivalent passivation

Enquiry about Grease Nipples Set

Description

  1. A  most popular grease nipples in a convenient compartmentalized refillable carry kit.
  2. A grease fitting/grease nipple/zerk fitting is used in mechanical systems to feed lubrication grease under moderate to high pressure between frictional surfaces.
  3. Ball check in the head prevents dirt and grit from getting into the fitting.
  4. Heavier wall thickness for extra strength.
  5. Fitting profile and dimensions comply with SAE, DIN, BS, JIS, & IS standards.

 

Reviews

There are no reviews yet.

Be the first to review “Grease Nipples Set”

Your email address will not be published. Required fields are marked *

Related products

  • Grease Nipples

    Two Face Grease Nipples

    • Standard: DIN 71412, SAE J-534
    • Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
    • Thread: Parallel,  Taper
    • Sizes: As per below chart or as per customer requirement
    • Heat Treated Springs For increased Life
    • Surface treatment: zinc plated with clear/yellow/olive green/trivalent passivation.
  • Grease Nipples , All Categories

    Metric Thread Grease Nipples

     

    • Standard: DIN 71412
    • Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
    • Thread: Parallel , Taper
    • Sizes: As per below chart or as per customer requirement
    • Heat Treated Springs For increased Life
    • Surface treatment: zinc plated with clear/yellow/olive green/trivalent passivation

    ISO Metric thread is a globally standardized thread and metric thread grease fittings are most widely used fittings in the …

  • Grease Nipples

    BSP Thread Grease Nipple

    • Standard: DIN 71412
    • Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
    • Sizes: As per below chart or as per customer requirement
    • Heat Treated Springs For increased Life
    • Surface treatment: zinc plated with clear/yellow/olive green/trivalent passivation

    BSP thread grease nipples are manufactured in parallel (G) and taper (R) thread.

  • Grease Nipples

    Engine Grease Nipples

    • Standard: DIN 71412, ISO
    • Material: Mild Steel, En1AL, 11SMnPb30+C, SAE 12L13
    • Thread: Parallel
    • Sizes: As per below table or as per customer requirements
    • Heat Treated Springs For increased Life
    • Surface treatment: zinc plated with clear/yellow/olive green/trivalent passivation